TEAK FINISHES
SEALER
Teak finished with a sealer should be covered in extreme weather. Do not leave it standing in water for long periods of time. For regular maintenance, simply rinse with water and wipe with a soft cloth. The sun’s UV rays can cause deterioration to outdoor finishes in as little as six months. Depending on exposure to sun, rain, temperature and humidity, the surface will eventually require periodic sanding and reapplication of the sealer.
CLEAR SEALER
Clear sealer helps to maintain the teak’s original color. Pieces with clear sealer should be cleaned monthly by rinsing with water and wiping with a soft cloth. Periodic sanding and reapplication of the clear sealer is required. Before reapplication, we recommend first cleaning the furniture with soap and water. Then allow it to dry, and wipe the entire piece with acetone and light abrasive pad. Reapply the sealer using a clean cloth for up to six light coats as needed. After all coats are applied, wipe the furniture with a clean cloth to even out the finish.
HIGH-GLOSS YACHT FINISH
In tradition with the world’s great shipbuilders, the Sutherland yacht finish reveals the beauty of teak’s original color and grain like no other. At least twelve coats of high-gloss varnish are hand-applied.The furniture is carefully sanded between each coat and the results are simply breathtaking. Periodic reapplication of varnish is required. We recommend first cleaning the furniture with soap and water before reapplication. Allow it to dry, then wipe the entire piece with acetone. Reapply up to two light coats of varnish.
DARK SEALER
Dark sealer enhances the teak’s original color and gives the wood a darker hue. Pieces with dark sealer should be cleaned monthly by rinsing with water and wiping with a soft cloth. Periodic sanding and reapplication of the dark sealer is required. Before reapplication, we recommend first cleaning the furniture with soap and water. Then allow it to dry, and wipe the entire piece with acetone and light abrasive pad. Reapply the sealer using a clean cloth for up to six light coats as needed. After all coats are applied, wipe the furniture with a clean cloth to even out the finish.
POWDER COATED COMPONENTS
Powder coat covers the metal components used with teak. This metal finish should be washed with water, soap and a soft cloth. These metal parts have holes in the bottom of the rails; so do not submerse these pieces in water. Powder coated furniture should not be dragged, as this will scratch the coating off the edges of the piece, causing it to discolor over time.
TEAK OIL STAINS
Since teak does not absorb water and is rich in natural oils and silicates, the weathering process includes oil surfacing. This teak oil often stains cushions. Fabric stained by teak oil can be cleaned with soap and water or a special eucalyptus-based cleaner available through Sutherland. Please be aware that this is a naturally repeating process that cannot be prevented. New or very young teak will experience natural oil surfacing that appears like a "watermark" or irregular pattern type of discoloration. These areas are a part of the natural maturing process and can be easily removed with gentle washing.
|
|